450mm X 300mm Duct Access Box Section 150mm Deep

- Order securely online 24/7
450mm X 300mm Duct Access Box Section  150mm Deep

450mm X 300mm Duct Access Box Section 150mm Deep

Duct Access Chamber / Draw Box

Although it is aimed primarily at the Street Lighting and Traffic Signals industries, it is suitable for most applications where a duct access chamber is required.
The robust design means that the boxes are not prone to deformation whilst being backfilled with concrete, unlike some other systems on the market, giving the contractor and client peace of mind.

Contractor Benefits
The benefits to the contractor are:
Robust Design
Speed and ease of installation
Light weight sections
150mm deep sections for greater flexibility and less waste
Pre-Trepanned guide holes for easy access
Interlocking sections
Pre-Formed base units
Cost competitive against traditional products
Can be installed with or without concrete surround

Recommended Installation Guide
The Access Chamber should be bedded on a base of 100mm thick C20 drymix concrete and the base be
chamfered to obtain a natural soakaway outlet. Alternatively use a pre-formed base set in no-fines semi
porous concrete mix.
The sides can be backfilled with dug material, granular material or concrete.
Duct inspection chamber are be manufactured from 32mm thick, high density polyethylene and have a
smooth inner wall with reinforcing ribs on the external wall for extra rigidity. Each section is 150mm overall depth and are supplied with standard a locating flange to the top section for ease of assembly. Assembled Boxes are capable of withstanding a 12.5 tonne wheel load, without the need for structural concrete surround.

Boxes are made up of separate, interlocking sections and have the capability to be assembled or
disassembled on site without the need for sawing or specialist equipment.

Box Sections come complete with pre-formed knock out sections to accommodate duct sizes of 50mm, 66mm and 110mm outside diameters.
Boxes can be supplied with a pre-formed GRP base unit for ease and speed of installation which should be bedded in a no-fines, semi porous, concrete mix to allow any ground water to flow away.

The Access should be bedded on a base of 100mm thick C20 drymix concrete and the base be chamfered to obtain a natural soakaway outlet. Alternatively use a pre-formed base set in no-fines semi porous concrete mix. The sides can be backfilled with dug material, granular material or concrete.

Please select a quantity below and then add to basket:
Price: 15.78 excl. VAT
Quantity (min. quantity: 4)
 
Copyright ©2014 Building Supplies R Us